Automatic Drying Industrial Customized Made Conveyor/Tunnel/Melt Belt Dryer

Description:

● Heat source (for example, low pressure steam or thermal conduct oil) passthrough the sealed jacket. The heat will be transmitted to raw material to bedried through inner shell;
● Under driving of power, the tank is rotated slowly and the raw material inside itis mixed continuously. The purpose of reinforced drying can be realized;
● The raw material exists is under vacuum. The drop of steam pressure makesthe moisture (solvent) at the surface of raw material become saturation and willevaporate. The solvent will be discharged through vacuum pump an recoveredin time. The inner moisture (solvent) of raw material will infiltrate, evaporate anddischarge continuously. The three processes are carried out unceasingly andthe purpose of drying can be realized within a short time.

Features

1.High Efficiency

In general, it takes about 2 days for natural drying and 6-8hours for drying oven. However the cassava drying machine works continuously and only requires 2-4h.it greatly shorten the drying time and increase the capacity.

2.Labor Saving

Equipped with automatic feeding and discharge system, the cassava chip dryer only need 1-2 operators for the entire process.

3.Uniform Drying

Feeding conveyor is mounted with a distributing device, According to the material properties , customers can adjust the height of device, thus adjusting the thickness of material. The maximum material thickness can be 8-10cm.